|
QuickCode:
QQBPGM
Corrosion Testing: Application and Use of Salt Fog, Humidity, Cyclic, and Gas Tests
Seminar Overview
This two days hands-on class will provide you with a practical working knowledge of various ASTM corrosion tests. The test equipment used for this standard practice is actually present in the classroom, where you will learn how to operate the equipment and conduct the tests. Learn terminology pertinent to the test and the correct application and proper performance of the standard. Fee per person: $795.
Provider: ASTM (American Society for Testing & Materials) – $795
Topic(s): Technical/Engineering
Who Should Attend?
Corrosion technicians, product test personnel, laboratory supervisors
|
Detailed Overview/Outline
Why You Should Attend
This 2-day HANDS-ON class will provide you with a practical working knowledge of various ASTM corrosion tests. The test equipment used for this standard practice is actually present in the classroom, where you will learn how to operate the equipment and conduct the tests. Learn About
You will learn about:
- Correct application and proper performance of the standard
- Terminology pertinent to the test
- Chemical and physical supporting knowledge
- Ingredients and solutions used in order to test properly and safely
- How to operate the equipment
- Collecting data properly and preparing reports
- Performing on-going operator requirements and responsibilities
- Utilize safety measures, methods, and procedures.
Demonstrations
Will Include
- Mixing solutions
- Cleaning coupons and samples
- Evaluation of results and samples
- Use of salt fog type corrosion test equipment
Who Should Attend
Corrosion Technicians
- Product Test Personnel
- Laboratory Supervisors
- Anyone who needs knowledge of ASTM corrosion tests
Note: This course is NOT intended for senior technicians and laboratory supervisors with years of experience. Fee Includes
- Referenced Documents (listed below)
- Course Notes
- Certificate Of Attendance
- 1.5 Continuing Education Units
- Coffee Breaks
Course Outline
- Purpose, Application, and History of the Test
- Corrosion and Test Terminology
- Chemical and Physical Background; and Supporting Knowledge
- Ingredients and Solutions used for the Test (Water; Salt; Salt Solution; Air Supply; Gases)
- Utilization of Ingredients (Methods and Procedures; Safety Measures; Humidification; Temperature; Fog; Test Pieces/Coupons/Samples; Condensate)
- Equipment (Proper Operation; On-going Operator Requirements and Responsibilities; Safety; Comparison Samples; Standardized Corrosion Coupon; Calibration)
- Analysis and Records (Proper Collection of Data; Evaluation and Interpretation of Results; Preparation of Reports)
- Maintenance (Materials and Supplies; Equipment; Coupons/Test Pieces/Samples; Records; Preventative Maintenance)
- Value of Testing (Cost of Savings; Supplies Control; Process or Product Quality Control; Product Development)
Referenced Documents
This course references approximately 12 ASTM standards. Some of them include:
ASTM Standards:
- B117 Practice for Operating Salt Spray (Fog) Apparatus
- D 1193 Specification for Regent Water
- E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of Test Methods
- G85 Practice for Modified Salt Spray (Fog) Testing
Publications:
- How To Run a Salt Spray Test-by Raymund Singleton
About ASTM and Sponsoring Committee G01
ASTM is one of the world's largest voluntary standards development organizations. ASTM standards have grown to be among the world's most widely used and accepted documents. The 76-volume Annual Book of ASTM Standards (now available on CD ROM) contains over 11,000 standards written by 34,000 members on our 129 technical committees. These standards are widely used throughout the world as the basis of purchasing and other contracts, codes, laws and regulations.
Sponsor Background:
ASTM, celebrated it's 100th anniversary in 1998, is one of the world's largest voluntary standards development organizations. ASTM standards have grown to be among the world's most widely used and accepted documents. The 81-volume Annual Book of ASTM Standards contains over 12,000 standards written by 34,000 members on our 140 technical committees. These standards and related information are widely used throughout the world as the basis of purchasing and other contracts, codes, laws and regulations. ASTM Committee D-2 on Petroleum Products and Lubricants developed the standard used in this course.
Instructor(s):
Raymund Singleton
Instructor Background:
Raymund Singleton is president and owner of the Singleton Corp. of Cleveland, OH, which manufactures accelerated corrosion testing chambers and other environmental exposure equipment and systems. Also manufactured are "barrel type" metal finishing equipment and systems for electroplating, phosphating, black oxidizing, and metal cleaning.
Singleton holds U.S. patents for both corrosion testing and metal finishing apparatus. In addition to giving presentations on these topics to various trade groups, he has written articles on corrosion testing which have been published in Metal Finishing and Products Finishing.
He is a member of the American Electroplaters and Surface Finishers Society and of ASTM, where he is currently chairman of ASTM's Section on Cabinet Corrosion Tests. Singleton obtained his Bachelor of Science degree in mathematics from Baldwin-Wallace College.
This seminar has 2 available dates/locations. Click the button below to view them all and to sign up for this seminar. To quickly return to this seminar at a later time, you can search by its QuickCode: QQBPGM.
 Get updated when new dates are added for this seminar. |
| Get a free personalized recommendation from our experts! |
Questions? Please call us Toll-free at (877) SEM-INFO. |
